Heavy metal analysis prices: costs, factors, and usefulness of laboratory tests

Written by: Joseph OLIVIER

Published on September 29, 2025

Time to read 7 min

Summary

Introduction Why perform a heavy metal analysis? The list of the most monitored heavy metals The particular importance of soil analysis Key steps in soil analysis Heavy metal analysis prices: How much does it cost? Average price ranges in France Regulatory thresholds in France and Europe How is a laboratory analysis carried out? Conclusion Frequently Asked Questions (FAQ) Why trust Pouryère for your soil analysis? To learn more

Introduction

The presence of heavy metals in the environment is a public health and sustainability issue. These elements accumulate in soils, water, and sometimes food, representing major health and environmental risks.

Before launching an agricultural, real estate, or industrial project, it is often necessary to verify the quality of the land or water through heavy metal analysis . This process allows for the assessment of contamination, compliance with regulations, and the implementation of appropriate solutions.

But what is the price of heavy metal analysis in a laboratory? This cost depends on many parameters: type of sample, number of metals sought, method used and analysis time.

Why perform a heavy metal analysis?

Heavy metal analysis serves three main purposes:

Preserving human health

Some substances are particularly toxic.

Lead is the cause of lead poisoning, a serious neurological disease.
Mercury affects the nervous system and causes cognitive impairment.
Cadmium attacks the kidneys and increases the risk of cancer.
Arsenic is known to be a carcinogen.

These examples show how chronic exposure can have lasting consequences.

Protect the environment

Heavy metals do not degrade and accumulate in ecosystems.

They seep into the soil and contaminate the groundwater.
They are absorbed by plants and reach the food chain.
They endanger biodiversity by affecting fauna and flora.

Soil and water analysis therefore makes it possible to prevent silent, but lasting contamination.

Comply with the regulations

Regulatory thresholds set in Europe and France require regular checks.

Farmers must respect limits in soils and sewage sludge.
Industrial companies are required to monitor their emissions and sites.
Local authorities must guarantee the quality of drinking water.

Heavy metal analysis is therefore not only a prevention tool but also a legal requirement.

The list of the most closely monitored heavy metals

The list of heavy metals tested in the laboratory depends on the context and future use of the site. However, some are systematically tested for because they represent the greatest health and environmental risks.

Heavy metal	Symbol	Main sources	Health effects
Antimony	Sb	Alloys, batteries	Cardiac effects, irritations
Arsenic	As	Pesticides, treated wood	Cancers, cardiovascular disorders
Barium	Ba	Pigments, petroleum industry	Heart and digestive problems
Cadmium	CD	Fertilizers, metallurgy	Kidney damage, cancers
Chromium	Cr	Tanneries, metallurgy	Cancers, respiratory problems
Copper	Cu	Fungicides, electronics	Liver disorders
Mercury	Hg	Gold panning, chemical industry	Neurological disorders
Lead	Pb	Paints, batteries	Lead poisoning, neurological damage
Molybdenum	Mo	Alloys, fertilizers	Digestive problems
Nickel	Neither	Metallurgy, batteries	Allergies, cancers
Selenium	Se	Fertilizers, mines	Digestive and endocrine disorders
Zinc	Zn	Galvanizing, fertilizers	Digestive problems, weakened immune system

This list of heavy metals is not exhaustive. Some laboratories add other elements depending on the nature of the site: uranium, thallium, cobalt or even tin.

The particular importance of soil analysis

Soil analysis is the most common type of analysis when it comes to heavy metals. It is essential in many cases:

Agriculture : check that food or organic crops do not present any risk of contamination.
Building and urban planning : checking the quality of a plot of land before construction or development.
Industrial sites : diagnosing the impact of past polluting activities.
Ecological restoration : assessing the feasibility of a brownfield rehabilitation project.

Unlike water or food analysis, soil analysis requires a rigorous sampling protocol. Soil is not homogeneous: metal concentrations can vary depending on depth, location, or the history of the land.

Key steps in soil analysis

To be reliable, a soil analysis follows a rigorous protocol:

Sampling : collection of representative samples, often at different depths.
Preparation : drying, grinding and homogenization.
Mineralization : chemical dissolution of samples.
Instrumental analysis : ICP-MS or AAS.
Report : comparison with regulatory thresholds.

A complete soil analysis is therefore not limited to a simple number: it helps to understand the mobility of metals (fixed or transferable to water and plants).

Heavy metal analysis prices: How much does it cost?

The price of heavy metal analysis is influenced by:

The number of metals sought : a targeted analysis (3 to 4 metals) is less expensive than a full panel (10 to 15 metals).
Sample type : soils often require longer preparation than water.
The analysis method : ICP-MS, which is more precise and sensitive, is generally more expensive than atomic absorption spectrometry (AAS).
The time frame : an urgent analysis can increase the bill by 30 to 50%.

Average price orders in France

The table below provides an estimate of costs according to the type of sample:

Sample type	Number of metals	Common method	Indicative price (€)
Agricultural soil	8 to 12	ICP-MS	90 – 150
Industrial flooring	8 to 12	ICP-MS or AAS	120 – 180
Drinking water	8 to 12	ICP-MS	70 – 120
Sewage sludge	8 to 12	ICP-MS	100 – 160
Food	3 to 8	ICP-MS	80 – 140

For projects requiring multiple samples, laboratories sometimes offer multi-sample packages , reducing the unit cost.

Regulatory thresholds in France and Europe

The limit values for heavy metals vary depending on the use. Here is an overview for agricultural soils :

Heavy metal	Lower limit (mg/kg)	Upper limit (mg/kg)
Antimony (Sb)	2	5
Arsenic (As)	20	50
Barium (Ba)	100	750
Cadmium (Cd)	1	3
Chrome (Cr)	100	150
Copper (Cu)	50	140
Mercury (Hg)	0.5	2
Lead (Pb)	50	300
Molybdenum (Mo)	1	5
Nickel (Ni)	30	75
Selenium (Se)	1	3
Zinc (Zn)	150	300

These thresholds serve as a reference but may vary depending on the country, the type of soil and its use (agricultural, residential or industrial).

How is a laboratory analysis carried out?

Heavy metal analysis follows a precise protocol:

Sampling on site using appropriate equipment.
Secure transport of samples.
Preparation (drying, grinding, filtering).
Instrumental analysis (ICP-MS, ICP-OES, AAS).
Report comparing results to standards.

Each step is essential to ensure the reliability of the results.

Choosing the right laboratory

Before commissioning an analysis, several criteria must be verified:

COFRAC accreditation (or equivalent European accreditation).
Proven experience in environmental analysis.
Detailed reports with graphs and recommendations.
Additional services : advice and remediation solutions.

What should be done if the standards are exceeded?

In case of contamination, several solutions exist:

Phytoremediation : the use of plants that absorb certain metals.
Chemical immobilization : adding lime, phosphates or biochar to fix the metals.
Excavation : removal and treatment of soil in a specialized center.

The choice depends on the level of contamination, the type of soil and the intended use.

Conclusion

The cost of heavy metal analysis is a relatively modest investment considering the stakes. With an average cost between €70 and €180, it helps guarantee the safety of soil, water, and food.

Of all the analyses, soil analysis remains the most crucial, as it determines the potential contamination of water and crops.

Ensuring the quality of your soil means protecting human health, complying with regulations and sustainably preserving the environment.

The author of the article: Joseph OLIVIER

Joseph Olivier is an entrepreneur in the environmental sector. Originally from Nantes, he trained in waste management before creating a circular economy consulting firm . In 2022, he co-founded Pouryère with the ambition of addressing citizens' concerns about soil quality in France and access to environmental data.

Frequently Asked Questions (FAQ)

What is the price of a heavy metal analysis in a laboratory?

The price for heavy metal analysis varies from €70 to €180 per sample. The cost depends on the type of sample, the number of metals tested for, and the method used.

Which heavy metals are most often tested for?

The list of heavy metals generally includes: lead, mercury, cadmium, arsenic, chromium, nickel, copper, zinc, antimony, barium, molybdenum and selenium.

Why is soil analysis so important?

Soil is the primary reservoir of heavy metals. Soil analysis can determine whether these contaminants are likely to migrate into water or crops.

Which analysis method is the most reliable?

ICP-MS is the most accurate because it detects trace metals. Atomic absorption spectrometry (AAS) is a less expensive alternative.

How long does it take to get the results?

The delivery time is usually 3 to 10 business days . An express service is available for an additional fee.

What should I do if my soil is contaminated?

Phytoremediation , chemical immobilization or excavation can be used depending on the degree of pollution.

How to choose a laboratory?

Check for COFRAC accreditation, experience in heavy metal analysis, and the clarity of the reports provided.

Why trust Pouryère for your soil analysis?

Comprehensive support, from sampling to interpretation

Pouryère supports you throughout the entire soil analysis process. Our sampling kits come with a comprehensive guide to walk you through the process. Once you've completed the analysis, simply send us your samples for full analysis and interpretation, which takes approximately ten days.

Solutions for individuals, farmers, communities and businesses

Each soil analysis kit is specialized and pursues a specific purpose:

AGROKIT for agronomic soil analysis.
POLLUKIT for pollutants.
PESTIKIT for pesticide detection.
PFASKIT for PFAS.
METKIT for soil metals.
SOLKIT for the complete health status of the soil (agronomic analysis, detection of pollutants and metals).
ISDIKIT is aimed at construction professionals.